Harrow Collector's Statue: Unboxing and Display Guide

By The Official Warframe Store | Published: 2026-10-19

Category: Tips & Care

Learn how to safely unbox and display your Harrow Collector's Statue with step-by-step guidance, including setup tips and dusting advice for long-lasting enjoyment.

Quick answer

Unbox your Harrow Collector's Statue by carefully removing the packaging, assembling the Scourge Weapon and Thurible, then placing the 9-inch polyresin figure on a stable, dust-free shelf.

Why unboxing technique matters

The statue is made from polyresin and polystone, materials that can chip if handled roughly. Taking your time during unboxing prevents damage to the dark priest's intricate details, including the Scourge Weapon and Thurible.

Common mistake: pulling the statue out by the weapon or Thurible can snap those delicate parts. Always grip the base or the figure's torso.

Display location trade-offs

A high shelf keeps the statue away from accidental knocks but may require a step stool for cleaning. A low shelf makes dusting easier but increases the risk of pets or children bumping it.

Avoid direct sunlight, which can fade the paint over time, and humid areas like bathrooms that may affect the polyresin finish.

Unboxing and display steps

1. Prepare your workspace: Clear a flat, soft surface (like a table with a cloth). Have a small screwdriver or tweezers nearby for any twist ties. Wash and dry your hands to avoid transferring oils to the statue. Check that the box is intact before opening; if damaged, photograph it for potential returns.
2. Open the outer box and inner tray: Cut the tape on the shipping box. Lift the inner art box out. Open the art box flaps and remove the foam inserts. Gently lift the top foam layer to reveal the statue and accessories. Do not cut into the foam—use your fingers or a blunt tool to separate it.
3. Remove the statue and accessories: Grip the statue by its base or the figure's torso, not the weapon or Thurible. Lift it straight up. Place the statue on the cloth. Then remove the Scourge Weapon and Thurible from their slots. Common mistake: twisting the weapon during removal can break the peg. Pull straight out.
4. Assemble the Scourge Weapon and Thurible: Align the peg on the Scourge Weapon with the hole in the statue's right hand. Gently push until it clicks. Repeat for the Thurible in the left hand. Do not force—if it resists, check alignment. If the peg is tight, warm it slightly with your hands (not heat tools) to expand the plastic slightly.
5. Place the statue on the display shelf: Choose a stable shelf away from edges, direct sunlight, and heat vents. Center the statue so it doesn't overhang. Use a non-slip pad under the base if the surface is slippery. Avoid placing near air conditioning vents; temperature changes can cause polyresin to expand and contract.
6. Dust and maintain regularly: Use a soft, dry microfiber cloth or a canned air duster to remove dust from the crevices. For stubborn spots, lightly dampen the cloth with water (never alcohol or cleaners). Dust every 2-4 weeks to prevent buildup that can scratch the paint when wiped.

About the Harrow Collector's Statue

Harrow Collector's Statue: The statue stands 9 inches (22 cm) tall and includes the Scourge Weapon and Thurible. This height makes it a prominent display piece that fits well on standard shelves, while the separate accessories require careful handling during setup.
Harrow Collector's Statue