How to Frame and Hang a Warframe Poster Without Damage
By The Official Warframe Store | Published: 2026-10-16
Category: How-to Guides
Step-by-step guide to framing and hanging a Warframe poster without damage, from measuring and mounting to sunlight protection and safe hanging.
Quick answer
To frame a Warframe poster without damage, measure the print, choose a frame with at least 1–2 inches of mat overlap, mount it with archival materials instead of tape, block UV light, and hang it with two wall anchors so the weight is evenly supported. For a 36" x 21" print like the Caliban Prex Poster, this means a frame at least 38" x 23" and a mat opening smaller than 36" x 21".
Measure the print before you buy anything
Lay the poster flat on a clean surface and measure both the width and height at the edges, not the center. Paper can relax slightly, so use the largest measurement. The Caliban Prex Poster is listed at 36" x 21", which is wider than many standard frames. Write the number down and take it with you when shopping for a frame or mat.
Choose a frame and mat that create a safe border
A frame that matches the poster size exactly forces the paper against the frame lip, which can crease the edges. Instead, choose a frame 2–4 inches larger than the print in each direction and have a mat cut with an opening 1/4 to 1/2 inch smaller than the poster on every side. That overlap holds the print flat without adhesive. If you prefer a frameless look, use a poster hanger with a wide grip, but accept that the top and bottom edges stay exposed to air and light.
Mount with archival materials, never tape
The most common damage comes from tape, glue dots, or spray adhesive. These leave stains and can tear the surface when removed. Use acid-free photo corners, archival mounting strips, or a hinging method with Japanese tissue and wheat starch paste. If you are not confident with hinging, have a local framer do it. For a poster you plan to move often, photo corners let you remove the print without residue.
Protect the poster from sunlight and UV
Direct sun fades ink and yellows paper faster than any other factor. Hang the poster on a wall that receives indirect light, or use glazing with UV filtering. Standard glass blocks some UV but not all; acrylic with a UV coating is lighter and safer for large frames. Even with UV glazing, avoid placing the frame within a few feet of a window that gets strong afternoon sun.
Hang with two points and the right hardware
A single nail or hook lets a large frame swing and twist, which can crack the glass or bend the frame corners. Use two hooks or D-rings spaced 1/3 of the frame width from each side, and anchor them into studs or use wall anchors rated for at least twice the frame weight. For a 36" x 21" framed poster, expect 5–10 pounds with glass and mat. Check that the frame sits flush against the wall; felt pads on the bottom corners reduce vibration and keep the frame level.
Step-by-step framing and hanging process
- Step 1: Measure the poster flat: Place the poster on a clean, flat surface and measure width and height at the edges. Record the largest numbers. Common mistake: measuring the printed image area instead of the full paper, which leads to a frame that is too small. Checkpoint: your frame should be at least 2 inches larger than the poster in both directions.
- Step 2: Select a frame and mat with overlap: Buy a frame 2–4 inches larger than the print and order a mat with an opening 1/4 to 1/2 inch smaller than the poster on all sides. Common mistake: choosing a frame that matches the poster size exactly, which pinches the edges. Checkpoint: the mat should cover the outer 1/4 inch of the poster without adhesive.
- Step 3: Mount with archival corners or hinges: Use acid-free photo corners, archival mounting strips, or a framer-applied hinge. Never use tape, glue, or spray adhesive. Common mistake: taping the poster directly to the backing board, which stains and tears over time. Checkpoint: the poster should stay in place when the frame is gently shaken, with no adhesive touching the front.
- Step 4: Add UV-filtering glazing: Choose acrylic with a UV coating or UV-filtering glass. Common mistake: assuming any glass blocks all UV; standard glass only reduces some UV. Keep the frame out of direct sun even with UV glazing. Checkpoint: hold the glazing up to a light; if you can see a strong color shift through it, it is not UV-filtering.
- Step 5: Hang with two anchors: Install two hooks or D-rings spaced about one-third of the frame width from each side, anchored into studs or with wall anchors rated for twice the frame weight. Common mistake: hanging from a single nail, which lets the frame tilt and swing. Checkpoint: the frame should sit level and flush against the wall; add felt pads to the bottom corners to prevent vibration.
Product facts that affect framing
- Caliban Prex Poster: The Caliban Prex Poster is 36" x 21" and designed by Warframe Concept Director Eric Vedder. The 36-inch width means you need a frame wider than many standard poster frames, so measure carefully and consider a custom mat.
- The Art of Warframe: Concept-Illustration-Design - Paperback Edition: The Art of Warframe: Concept-Illustration-Design paperback edition has over 400 pages and includes three loose pages of Mynki's art. If you display loose art pages alongside a poster, use the same archival mounting and UV protection to prevent fading and creasing.
