How to Frame and Hang Warframe Posters Without Damage

Quick answer

Frame your Warframe poster with acid-free backing and UV-protective glazing, then hang it using two wall-safe hooks or strips rated for the frame's weight. Keep it out of direct sunlight and humid rooms to avoid fading and warping. If you plan to swap prints often, use a ready-made frame with a removable back rather than dry-mounting the poster.

Your Warframe poster does not have to yellow, curl, or tear just because it is on a wall. The difference between a print that looks crisp years later and one that sags comes down to three things: what touches the paper, how the frame supports it, and where you hang it.

This guide walks through the full process for a Caliban Prex Poster or any standard-size print, from choosing materials to the final hook placement. Each step includes a checkpoint so you can catch the most common mistakes before they damage the art.

Step 1: Measure and choose the right frame

Measure your poster's exact width and height before shopping. The Caliban Prex Poster is 36 inches by 21 inches, a non-standard size, so a custom frame or a frame with a mat that covers the edges will fit better than a standard 24x36 frame. A mat also keeps the paper from touching the glazing, which prevents condensation marks over time.

For standard prints, buy a frame with at least a quarter-inch of extra depth. That space lets you add an acid-free backing board without bowing the poster against the glass. If the frame has a cardboard back, replace it; cardboard is acidic and will stain the print.

• Checkpoint: measure twice and write down the numbers before ordering any frame.

Step 2: Use acid-free materials only

Paper damage usually comes from the materials touching it, not the wall. Choose an acid-free backing board and, if you use a mat, make sure it is also acid-free and lignin-free. Avoid masking tape, rubber cement, and spray adhesive; these yellow and fail within a few years. If you must secure the poster, use archival linen tape along the top edge only, forming a hinge that lets the paper expand and contract.

For a quick, reversible option, photo corners hold the poster without adhesive touching the front. This is the safest choice if you might sell or swap the print later.

• Common mistake: taping all four sides, which causes ripples when humidity changes.

Step 3: Assemble the frame without over-tightening

Clean the glazing on both sides before assembly. Lay the frame face-down, drop in the glazing, then the mat, then the poster, then the backing board. If the frame uses points or clips, press them just enough to hold the stack snug. Over-tightening bends the backing and creates pressure marks on the poster.

Do not force a poster that is slightly too large. Trimming the paper lowers its value and can void any collectible appeal. A frame one size up with a mat is the better fix.

• Checkpoint: shake the frame gently. If the poster shifts, add a thin acid-free shim behind the backing.

Step 4: Pick a wall location that protects the print

Direct sunlight fades inks even through glass, and bathrooms or kitchens add moisture that can wrinkle paper. Hang your Warframe wall art on an interior wall away from vents, radiators, and windows. If the only spot gets bright light, choose glazing with UV filtering, though no glazing blocks all fading.

For heavy frames, screw into a stud or use a wall anchor rated for at least twice the frame's weight. Two hooks spaced a few inches apart keep the frame level and reduce sway.

• Avoid poster hanging tips that rely on a single nail for large frames; they tilt and stress the corner joints.

Step 5: Hang level and check the fit

Mark hook positions with a pencil and a level, then install the hooks before lifting the frame. Attach picture wire or a sawtooth hanger to the frame's back, not the backing board. Once hung, step back and check that the poster sits flat inside the frame and the wire is not visible from the front.

If the frame leans away from the wall at the top, add small rubber bumpers to the bottom corners. This keeps air moving behind the frame and reduces condensation.

• Checkpoint: press gently on the glazing. Any crackle or movement means the frame is too tight.

Poster framing steps at a glance

1. Measure the print: Record exact width and height, then choose a frame with a mat or custom size. Checkpoint: standard frames rarely fit 36x21 prints without a mat.
2. Gather acid-free supplies: Use an acid-free backing board, archival tape or photo corners, and UV glazing if possible. Checkpoint: if the backing smells like cardboard, do not use it.
3. Assemble loosely: Layer glazing, mat, poster, and backing; secure with points or clips without crushing the stack. Checkpoint: the poster should not shift when you tilt the frame.
4. Choose a safe wall: Hang away from sunlight, moisture, and heat sources; use two anchors rated for the weight. Checkpoint: a single nail is not enough for a large framed poster.
5. Hang and verify: Level the frame, add bumpers if it leans, and confirm the poster sits flat. Checkpoint: recheck after a week for sagging or condensation.

Product facts that affect framing

• Caliban Prex Poster: The poster is 36 inches by 21 inches and features art by Warframe Concept Director Eric Vedder. Its non-standard size means you will likely need a custom frame or a mat to fit a standard frame, and the large surface area makes acid-free backing more important.
• Harrow Collector's Statue: The statue stands 9 inches (22 cm) tall and is made from Polyresin and Polystone. If you display the statue near your poster, keep them on separate shelves or use a stable bracket; resin statues are heavy and can fall into a framed print.

Framing a Warframe poster correctly is mostly about what touches the paper and where it hangs. Use acid-free materials, avoid over-tightening, and keep the print out of harsh light. Done right, your wall art stays sharp and flat for years.