How to Store and Protect Your Warframe Collectibles Long Term

Quick answer

Store your Warframe collectibles in a cool, dry, dark place with acid-free or inert materials, keep heavy statues low and plushies breathable, and check everything twice a year. The goal is stable temperature, low humidity, and no direct pressure on painted or soft-enamel surfaces.

Collectibles do not fail all at once. They fade, warp, rust, or get crushed slowly, usually because of light, moisture, heat, or the wrong box. A little planning now saves you from opening a bin in two years and finding a cracked statue or a flattened plush.

This guide walks through a practical storage routine for the kinds of items sold at The Official Warframe Store, from resin statues and soft-enamel pins to plushies and tote bags. Each step includes the mistake that causes most damage so you can skip it.

Why long-term collectible care is different from everyday display

Display and storage have opposite priorities. On a shelf, you want visibility and easy access. In storage, you want darkness, stable humidity, and zero movement. Light breaks down pigments and adhesives, humidity corrodes metal pin backs and can soften resin over time, and vibration or stacking pressure causes chips and bends.

That means the best storage spot is rarely a garage, attic, or damp basement. A closet in a climate-controlled room is usually safer. If you must use a garage, keep items in sealed bins with desiccant and accept that extreme seasonal swings still carry risk.

• Aim for a stable room, not a perfectly sealed room. Small, slow changes are safer than big swings.
• Keep storage away from exterior walls, windows, and floor-level concrete, which tend to be damp.

Choose the right containers and materials

Not all plastic is safe for long-term collectible preservation. Some bins and bubble wrap release gases that can haze paint or leave marks on soft enamel. Look for polyethylene or polypropylene bins, acid-free tissue, and inert foam. Avoid PVC-based wraps and ordinary newsprint, which can transfer ink and acid.

Label every container on the outside with contents and date. You will not remember what is in the third bin, and digging through boxes is when accidents happen. A simple index card taped to the lid is enough.

• Use acid-free tissue or clean cotton cloth between painted surfaces.
• Skip vacuum-sealed bags for plushies and fabric items; they trap moisture and crush pile.

Store statues and figurines without stress points

Resin statues are heavy and brittle at thin points like weapons, capes, and bases. Never store a statue standing loose in a bin where it can slide. Wrap it in acid-free tissue, then foam, and place it base-down in a cut foam cradle or a padded box that prevents movement in any direction.

For a piece like the Nidus Collector's Statue: Pre-Order, which is about 8.5 inches tall and made of polyresin, the base is the strongest part, so it should carry the weight. Keep the included Nidus Coin in a separate small envelope or capsule rather than taped to the statue, where adhesive can mar the finish.

• Checkpoint: after packing, tilt the box gently. If you feel shifting, add foam before sealing.
• Do not store statues on their side for months; prolonged pressure can warp a base or bend a thin part.

Protect pins and small metal items from moisture

Soft-enamel pins are durable on the front but vulnerable at the back. Moisture causes pin posts and clutches to rust, and rust stains can bleed onto fabric or other pins. Keep pins in a dry box with a desiccant packet, and separate them so metal does not scratch enamel.

If you store pins on a fabric banner or lanyard, hang it rather than folding it. Folding puts pressure on the posts and can bend them. For loose pins, a small divided tackle box or a binder page with individual slots works well.

• Common mistake: storing pins in a bathroom or kitchen drawer where humidity spikes daily.
• Checkpoint: squeeze each clutch gently once a year; loose backs are the first sign of corrosion.

Keep plushies breathable and shape-safe

Plush storage is mostly about airflow and pressure. Vacuum bags and tight stacking flatten pile and can trap musty odors. Instead, place plushies in a breathable cotton pillowcase or a clean bin with the lid cracked, and avoid putting anything heavy on top.

For a larger piece like the Thumper Floof Plush, which is about 14 inches tall and 13 inches wide, give it its own space or place it on top of lighter items. If you must stack, put the plush last and never under a statue box.

• Fluff and reshape plushies every few months so creases do not set.
• Keep plushies out of direct sun; even indirect light fades fabric over years.

Handle bags, totes, and fabric accessories

Tote bags and fabric accessories should be clean before storage. Dirt and oils attract pests and set into fibers over time. Empty every pocket, wipe hardware with a dry cloth, and stuff the bag lightly with acid-free tissue to hold its shape.

Hang structured bags or lay them flat in a dust bag. Do not fold a printed tote along the same line for years, or the print can crack. A Marie Leroux Tote Bag, for example, stores best flat or hanging with nothing pressing on the graphic.

• Checkpoint: if hardware feels sticky, clean it before storage; residue attracts dust.
• Avoid cedar chests for fabric items unless the item is wrapped; cedar oils can transfer.

Set a simple inspection schedule

Long-term collectible care is not set-and-forget. Twice a year, open each container, check for moisture, pests, or shifting, and let fabric items air for an hour in a shaded room. This catches problems while they are still reversible.

Keep a small log of what you checked and when. If you notice a smell, condensation, or a chalky film on resin, move the item to a drier space immediately and replace desiccant.

• Replace desiccant packets every six to twelve months depending on humidity.
• If you see fine cracks on a statue, stop handling it and store it flat with support under the base.

Your step-by-step storage routine

1. Pick a stable, dark, dry location: Choose an interior closet or shelf in a climate-controlled room. Avoid garages, attics, basements, and bathrooms where humidity and temperature swing. Checkpoint: if the space smells damp or feels hot in summer, it is not safe for long-term storage.
2. Gather inert packing materials: Use polyethylene or polypropylene bins, acid-free tissue, inert foam, and desiccant packets. Avoid PVC wrap, newsprint, and vacuum bags. Common mistake: reusing grocery bags or bubble wrap from a move, which can leave marks on paint and enamel.
3. Clean and dry every item first: Dust statues with a soft brush, wipe pin backs with a dry cloth, and make sure fabric items are completely dry before packing. Checkpoint: any lingering moisture will be trapped and cause rust or mildew.
4. Pack statues base-down in a foam cradle: Wrap the statue in acid-free tissue, then foam, and place it base-down in a cut foam cradle so it cannot shift. Store the Nidus Coin separately. Checkpoint: tilt the closed box gently; if anything moves, add foam.
5. Store pins flat or hanging, never crushed: Keep pins in a divided box with desiccant, or on a hanging fabric banner. Do not fold a pin banner or stack heavy items on loose pins. Common mistake: leaving pins on a lanyard in a drawer where the posts bend under other objects.
6. Give plushies breathable space: Place plushies in a cotton pillowcase or a bin with the lid cracked, and never put heavy boxes on top. Reshape them every few months. Checkpoint: if the plush feels compressed or smells musty, air it out in shade before repacking.
7. Store bags and fabric accessories flat or hanging: Empty pockets, wipe hardware, stuff lightly with acid-free tissue, and store flat or hanging so prints are not folded along the same line. Common mistake: folding a printed tote for years, which cracks the graphic.

Product facts that affect storage

• Nidus Collector's Statue: Pre-Order: Approximately 8.5 inches (21.59 cm) tall, crafted from polyresin, and includes an exclusive Nidus Coin, an in-game Nidus Noggle, and 170 Platinum. Polyresin is heavy and brittle at thin points, so it needs a base-down foam cradle; the coin should be stored separately to avoid scratching the statue.
• Thumper Floof Plush: Approximately 14 inches tall and 13 inches wide, described as the biggest floof plush yet. Its size means it needs its own space or the top of a bin; stacking heavy items on it will flatten the pile.
• Arthur Protoframe Pin: Size 4 inches, made of soft enamel. A larger soft-enamel pin is more prone to bending at the post if stored under pressure, so keep it flat or on a hanging banner.
• Marie Floof Pin: Size 1.75 inches, made of soft enamel. Small pins are easy to lose and easy to scratch; a divided box or binder page keeps them dry and separate.

Good storage is mostly about avoiding the big four: light, moisture, heat, and pressure. Pick a stable spot, use inert materials, pack heavy items low and soft items breathable, and check everything twice a year. Your collection will look the same in five years as it does today.